Auxilliary Controller
The BurnerMate Model BM-AC provides automatic contorl for drum level, boiler draft and Flue Gas Recirculation (FGR) for new or existing boilers.
Precise Draft Control
- “GAP” PID draft control and firing rate feedforward assure stable even during load changes
- Important for outlet draft control on boilers with Induced Flue Gas Recirculation (FGR) Nox Reduction
Single Element Drum level control
- Drum level sensor causes the feedwater valve to open or close in proportion to the deviation from desired drum level
- Suitable for firetube boilers with moderate load swings and watertube boilers with slowly changing loads
Two element drum level control
- The steam flow signal allows the controller to respond properly during shrink and swell
- Suitable for watertube boilers with substantial load swings if the feedwater pressure is repeatable
Three Element Drum Level Control
- A feedwater flow sensor is added to allow the controller to compensate for variations in feedwater supply pressure
- Suitable for watertube boilers with substantial load swings and unrepeatable feedwater pressure
Flue Gas Recirculation (FGR) control
- FGR flow rate is controlled in response to boiler load
| BurnerMate Panel | |
|
Controller: Input Power: |
PCC-III 120 Vac (+/- 15%) |
| Inputs | |
|
Draft: Firing Rate: Drum Level: Drum Pressure: Feedwater Flow: Steam Flow: Outlet Damper Feedback: FGR Damper Feedback: Feedwater Valve Feedback: |
4-20 mAdc (optional) 4-20 mAdc (optional) 4-20 mAdc (optional) 4-20 mAdc (optional) 4-20 mAdc (optional) 4-20 mAdc (optional) Potentiometer (optional)* Potentiometer (optional)* Potentiometer (optional)* |
| Outputs | |
|
Outlet Damper: FGR Damper: Feedwater Valve: |
Triac or 4-20 mAdc (optional) Triac or 4-20 mAdc (optional) Triac or 4-20 mAdc (optional) |
| Optional Features | Add Suffix to BurnerMate Catalog Number |
|---|---|
| Flame Safeguard | Add "-FSG" suffix |